DC 5,000-E, Portable Electric Dust Collector

Manufacturer:  SAFE Systems, Inc.


This 5,000cfm dust collector was designed by SAFE Systems to provide the contractor a unit for tight spaces.  The original design was developed for use at the Kennedy Space Center. Caster mounted, with fork lift pockets and certified crane lifting eyes, the compact unit can easily be positioned in an optimum location.  The compact size allows it to be pushed through halls and doorways and transported on cargo elevators, reaching positions inside structures that otherwise would require long duct lengths.  One (1) 18” duct connection makes connecting vent hose quick. A large, container-style door makes filter and dust drawer access easy.

Six (6) cartridge filters collect the dust particles and are cleaned by a reverse pulse jet of compressed air, one row of three (3) filters, at a time.  The dust particles then fall into the dust drawer below that can be emptied by pulling it out or through the optional vacuum port on the back.

Belts and drives are eliminated by the direct-drive 15 HP motor. The NEMA 4 control box is dust and water tight to protect the electrical controls from contaminants and moisture.  The unit comes with 25’ of the properly sized SO cord to allow electrical connection at the job site. One large, easy to open and close “Container Style” door gives quick access to the filters and dust drawer.

Unit may be used with the HEPA-5000 After-filter System.  Some on-site assembly will be required if the contractor needs to take the HEPA-5000 and DC-5000E combination through standard 3' x 7' doorways.

Data Sheet



Phone: (425) 251-8545     18420 68th Ave S., Suite 202, Kent, WA 98032     Fax: (866) 607-8759

Close Window

Home