SAFE Systems, Inc.
This 4000cfm dust collector was designed by SAFE Systems to provide the contractor maximum flexibility and reliability. Skid mounted, with both fork lift pockets and certified crane lifting eyes, the compact unit can easily be positioned in an optimum location. The extendable legs raise the unit to accommodate a 55 gallon drum or other collection device under the dust hopper and then adjust to allow low profile shipping. A built-in platform under the hopper makes handling the drum quick and easy. One (1) 18” duct connection makes connecting vent hose quick. A large, container-style door makes filter access easy.
Airflow through the dust collector can be regulated with the inlet damper. Four (4) cartridge filters collect the dust particles and are cleaned by a reverse pulse jet of compressed air, one row of two (2) filters, at a time. The dust particles then fall into the hopper below that is equipped with a slide gate for quick dumping of the dust.Belts and drives are eliminated by the direct-drive 15 HP motor. The NEMA 4 control box is dust and water tight to protect the electrical controls from contaminants and moisture. The unit comes with 25’ of the properly sized SO cord to allow electrical connection at the job site. One large, easy to open and close “Container Style” door gives quick access to the filters and dust hopper. The latching, hinged duct cover means you no longer have to keep track of an unattached duct cover.
Phone: (425) 251-8545 18420 68th Ave S., Suite 202, Kent, WA 98032 Fax: (866) 607-8759