MSH 4-24-2, Blast and Recovery System

Manufacturer:  SAFE Systems, Inc.
Full load Amps
Air required
Air required
15-9 (Shipping position)
11-5 (Shipping position)
8-3 (Shipping position)
15-9 (Working position)
12-11 (Working position)
8-8 (Working position)
13,000 lbs. (Empty of abrasive)
120 VAC
20 Amps
330 CFM @ 125 PSIG (per nozzle blast outlet)
800 CFM @ 125 PSIG (if using induction vacuum)

Four-outlet blast machine (150 PSI, ASME certified)
24 tons of abrasive capacity (steel grit).
           Skid mounted

Two (2) adjustable, abrasive classification stations
120 volt AC, 1 phase, control systems
           1-1/2 air piping
Two (2) vacuum dust collectors
Eight (8) cartridge filters (part #1000 1245)
Automatic reverse pulse cleaning system for filters
air piping for pulse cleaning system
Air requirements for pulse cleaning system, 18 CFM @ 90 to 100 PSIG
800 CFM air induction vacuum systemm
           Requires double drop trailer for highway transport

Forklift pockets
Certified lifting eyes for handling by overhead crane
           Dust and trash discharges in standard 55 gallon drum (drum to be supplied by customer)
           System can be used with alternate vacuum system(s).

1.      Not intended to be shipped with any abrasive or dust/trash in the system.
2.      Recommend emptying dust and trash every 2 to 4 hours depending on collection rate.
3.      It is recommended that a qualified electrician connect this equipment to power.
4.      It is recommended that all new filters be coated with precoat dust prior to putting into service.

Phone: (425) 251-8545     18420 68th Ave S., Suite 202, Kent, WA 98032     Fax: (866) 607-8759

Close Window