Cyclone Recovery System

Manufacturer:  SAFE Systems, Inc.


Length                          11-2 (Shipping position)
Height                            5-7 (Shipping position)
Width                            5-3 (Shipping position)                                 

Width                             5-7 (Working position)
Length                            5-3 (Working position)
Height                            11-2 (Working position)
Weight                         750 lbs. (Completely empty) 


            Vessel is rated for 30 HG (vacuum).  Not rated for pressure.    

            Capacity, 30 cubic feet.

              6 abrasive dump valve (butterfly) on bottom of vessel.

            4 Suction inlet (Vacuum producer connection).

            4 Abrasive recovery hose inlet connection.

            Structural steel stand (legs) allows forklift access to drum and skid under the cyclone.

            Certified, gross weight lifting eyes for handling with overhead crane.

            Forklift pockets for handling when in the working position.

            Abrasive dump valve height will allow dumping into 55-gallon drum with cover and skid.

            800 CFM Jet (Induction) Vacuum with muffler.           


1.   Not intended to be laid on its side with abrasive in the vessel.

            2.   Recovery hose and hose to connect vacuum producer to the cyclone tank are not supplied.

            3.   Optional high-level probe shut down circuit for vacuum producer may be available.

            4.   Tank must be stood upright with a crane or large (high lift) forklift at the job site.

Phone: (425) 251-8545     18420 68th Ave S., Suite 202, Kent, WA 98032     Fax: (866) 607-8759

Close Window