Collection Tank (CT-200) for use with Recovery Systems

Manufacturer:  SAFE Systems, Inc.
Length
Height
Width
14-3 (Shipping position)
7-2 (Shipping position)
6-4 (Shipping position)
Width
Length
Height
Weight
6-4 (Working position)
7-2 (Working position)
14-3 (Working position)
3,200 lbs. (Completely empty)

Features:
           Vessel is rated for 30 HG (vacuum). Not rated for pressure.
           Capacity, 200 cubic feet of  abrasive (100 lbs. per cubic foot).
           8 abrasive dump valve on bottom of vessel.
           Vessel can be used in conjunction with a collection tank stand to elevate the dump valve.
           4, 5 or 6 suction (vacuum) inlet.
           4, 5 or 6 grit (recovery) inlet.
           12 x 16 Manway for interior access.
           Exterior ladder.
           Certified, gross weight lifting eyes for handling with overhead crane.
           Lifting eyes (empty weight) on shell of tank for handling when in the shipping position.

Notes:
1.      Not intended to be laid on its side with abrasive in the vessel.
2.      Recovery hose and hose to connect vacuum to collection tank not supplied.
3.      Optional high-level probe shut down circuit for vacuum producer may be available.
4.      Collection tank must be stood upright with a crane at the job site.



Phone: (425) 251-8545     18420 68th Ave S., Suite 202, Kent, WA 98032     Fax: (866) 607-8759

Close Window

Home