AD 1,200
DESICCANT AIR DRYER

The AD 1200 is a compact, skid mounted, deliquescent air dryer that will fit into places our other air dryers can't go.  The radiator is mounted on top of this unit creating a smaller footprint. With a drying capacity of approximately 1,200 CFM of air at 100 PSIG, this unit is ideal for drying air for abrasive blasting operations, accommodating 3-4 blasters, depending on nozzle size. The air powered heat exchanger (air to air) needs only 70 cfm of compressed air to operate.

The ASME certified tank is rated at 200 psi and holds approximately 750# of desiccant tablets which remove the moisture from the air.

Mounted on a sturdy protective frame with fork lift tubes and certified lifting eyes, the air dryer can be moved into position with either a fork lift or overhead crane. The 2-1/2 inlet and 3" outlet piping system has a particulate filter to trap solid particles and is large enough to reduce pressure loss in the piping. An air motor enables the system to operate totally without electrical power when using the manual moisture drain valve. If 120 Volt AC power is available, the automatic drain system can be used.

Data Sheet


Phone: (425) 251-8545     18420 68th Ave S., Suite 202, Kent, WA 98032     Fax: (866) 607-8759
 

Close Window

Home